Gigabyte G1.Guerrilla User Manual page 52

USB Keyboard Function
Allows USB keyboard to be used in MS-DOS. (Default: Enabled)
USB Mouse Function
Allows USB mouse to be used in MS-DOS. (Default: Disabled)
USB Storage Function
Determines whether to detect USB storage devices, including USB flash drives and USB hard drives
during the POST. (Default: Enabled)
Onboard Audio
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
Onboard H/W LAN
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
Onboard USB 3.0 Controller (Renesas D720200 USB Controller)
Enables or disables the Renesas D720200 USB controller. (Default: Enabled)
eSATA Controller (JMicron JMB362 Chip, eSATA Connectors)
Enables or disables the SATA controller integrated in the JMicron JMB362 chip. (Default: Enabled)
eSATA Ctrl Mode (JMicron JMB362 Chip, eSATA Connectors)
Enables or disables RAID for the SATA controller integrated in the JMicron JMB362 chip or configures
the SATA controller to AHCI mode.
IDE Disables RAID for the SATA controllers and configures the SATA controllers to IDE
mode. (Default)
RAID Enables RAID for the SATA controllers.
AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
GSATA3 6_7/IDE Controller (Marvell 88SE9182 Chip, GSATA3_6 and GSATA3_7 Con-
nectors)
Enables or disables the SATA controller integrated in the Marvell 88SE9182 chip. (Default: Enabled)
GSATA3 6_7/IDE Ctrl Mode (Marvell 88SE9182 Chip, GSATA3_6 and GSATA3_7 Con-
nectors)
Enables or disables RAID for the SATA controller integrated in the Marvell 88SE9182 chip or configures
the SATA controller to AHCI mode.
IDE Disables RAID for the SATA controller and configures the SATA controller to IDE
mode. (Default)
RAID Enables RAID for the SATA controller.
AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
BIOS Setup - 52 -