Gigabyte G1.Guerrilla User Manual page 84

B. Configuring SATA controller mode in BIOS Setup
Make sure to configure the SATA controller mode correctly in system BIOS Setup.
Step 1:
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). To
create RAID, set ICH SATA Control Mode under the Integrated Peripherals menu to RAID(XHD) (Figure 1)
(IDE by default). If you do not want to create RAID, set this item to IDE or AHCI.
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
eXtreme Hard Drive (XHD)
ICH SATA Control Mode
SATA Port0-3 Native Mode
USB Controllers
USB Keyboard Function
USB Mouse Function
USB Storage Function
Onboard Audio
Onboard H/W LAN
Onboard USB 3.0 Controller
eSATA Controller
eSATA Ctrl Mode
GSATA3 6_7/IDE Controller
GSATA3 6_7/IDE Ctrl Mode
higf: Move Enter: Select
F5: Previous Values
Step 2:
Save changes and exit BIOS Setup.
The BIOS Setup menus described in this section may differ from the exact settings for your moth-
erboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you
have and the BIOS version.
Appendix
Integrated Peripherals
[Disabled]
[RAID(XHD]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[IDE]
[Enabled]
[IDE]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Figure 1
- 84 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults