Gigabyte G1.Guerrilla User Manual page 56

Current CPU Temperature
Displays current CPU temperature.
Current System Temperature/SYSTEM1 Temp./SYSTEM2 Temp./SYSTEM3 Temp.
Displays current system temperatures detected by each system temperature sensor on the motherboard.
Current CPU FAN/SYS FAN/SYS FAN1/SYS FAN2/SYS FAN3 Speed (RPM)
Displays current CPU/system fan speeds detected by each fan header on the motherboard.
CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold,
BIOS will emit warning sound. Options are: Disabled (default), 60
90 C/194 F.
o o
CPU FAN Fail Warning
Allows the system to emit warning sound if the CPU fan is not connected or fails. Check the fan condi-
tion or fan connection when this occurs. (Default: Disabled)
CPU Smart FAN Control
Allows you to determine whether to enable the CPU fan speed control function and adjust the fan speed.
Normal Allows the CPU fan to run at different speeds according to the CPU temperature. You can
adjust the fan speed with EasyTune based on your system requirements. (Default)
Silent Allows the CPU fan to run at slow speeds.
Allows you to control the CPU fan speed under the Slope PWM item.
Manual
Disabled Allows the CPU fan to run at full speeds.
Slope PWM
Allows you to control the CPU fan speed. This item is configurable only when CPU Smart FAN Control
is set to Manual. Options are: 0.75 PWM value /
BIOS Setup
C/140 F, 70
o o
C ~ 2.50 PWM value / C.
o o
- 56 -
C/158 F, 80 C/176 F,
o o o o