Integrated Peripherals - Gigabyte G1.Guerrilla User Manual

2-6

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
eXtreme Hard Drive (XHD)
ICH SATA Control Mode
SATA Port0-3 Native Mode
USB Controllers
USB Keyboard Function
USB Mouse Function
USB Storage Function
Onboard Audio
Onboard H/W LAN
Onboard USB 3.0 Controller
eSATA Controller
eSATA Ctrl Mode
GSATA3 6_7/IDE Controller
GSATA3 6_7/IDE Ctrl Mode
higf: Move Enter: Select
F5: Previous Values
eXtreme Hard Drive (X.H.D) (Intel ICH10R South Bridge)
Enables or disables the X.H.D function for the SATA controllers integrated in the Intel ICH10R South
Bridge. When set to Enabled, the ICH SATA Control Mode item below will be set to RAID(XHD) au-
tomatically. For details on using the GIGABYTE X.H.D utility, refer to Chaper 4, "eXtreme Hard Drive
(X.H.D)." (Default: Disabled)
ICH SATA Control Mode (Intel ICH10R South Bridge)
Enables or disables RAID for the SATA controllers integrated in the Intel ICH10R South Bridge or config-
ures the SATA controllers to AHCI mode.
IDE Disables RAID for the SATA controllers and configures the SATA controllers to IDE
mode. (Default)
RAID(XHD) Enables RAID for the SATA controllers.
AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
SATA Port0-3 Native Mode (Intel ICH10R South Bridge)
Specifies the operating mode of the integrated SATA controllers.
Disabled Allows the SATA controllers to operate in Legacy IDE mode.
In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared with
other device. Set this option to Disabled if you wish to install operating systems that
do not support Native mode. (Default)
Enabled Allows the SATA controllers to operate in Native IDE mode.
Enable Native IDE mode if you wish to install operating systems that support Native
mode.
USB Controllers
Enables or disables the integrated USB controller. (Default: Enabled)
Disabled will turn off all of the USB functionalities below.
Integrated Peripherals
[Disabled]
[IDE]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[IDE]
[Enabled]
[IDE]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 51 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup