Ipv6 Lan Settings - TP-Link TD-W8970 User Manual

TD-W8970
• Leased Time: The Leased Time is the amount of time in which a network user will be
allowed connection to the modem router with their current dynamic IP address. Enter the
amount of time, in hours, then the user will be "leased" this dynamic IP address. After the
dynamic IP address has expired, the user will be automatically assigned a new dynamic IP
address. The default is 1440 minutes.
The detailed configuration about DHCP server, please refer to section

4.5.5 IPv6 LAN Settings

Choose menu "Network" "IPv6 LAN Settings", you can configure LAN IPv6 interface for your
modem router.
Address Autoconfiguration Type: Select a type to assign IPv6 addresses to the computers
in your LAN. RADVD and DHCPv6 Server are provided.
1) If RADVD is selected, it doesn't need to be configured.
2) If DHCPv6 Server is selected, please complete the following parameters.
•
Start IPv6 Address: Enter a value for the DHCPv6 server to start with when issuing IPv6
addresses.
•
End IPv6 Address: Enter a value for the DHCPv6 server to end with when issuing IPv6
addresses.
•
Leased Time: The Leased Time is the amount of time in which a network user will be
allowed connection to the modem router with their current dynamic IPv6 address. Enter
the amount of time, in hours, then the user will be "leased" this dynamic IPv6 address.
After the dynamic IPv6 address has expired, the user will be automatically assigned a
new dynamic IPv6 address. The default is 86400 seconds.
300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
Figure 4-18
Figure 4-19
36
4.6 DHCP Server.