TP-Link TD-W8970 User Manual page 14

TD-W8970
(WLAN)
Slow Flash
(WPS)
(LAN1-4)
(USB on the
back panel)
Note:
1. If the ADSL LED is off, please check your Internet connection first. Refer to
the Modem Router
you have already made a right connection, please contact your
Internet service is available now.
2. If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off,
please refer to Note
configuration. You may need to check this part of information with your ISP and make sure
everything have been input correctly.
300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
On Wireless is enabled but no data is being transmitted.
The modem router is sending or receiving data over the wireless
Flash
network.
Off Wireless function is disabled.
A wireless device has been successfully added to the network by
On
WPS function.
WPS handshaking is in process and will continue for about 2
minutes. Please press the WPS button on other wireless devices
that you want to add to the network while the LED is flashing.
A wireless device has failed to be added to the network by WPS
Quick
function. Please refer to
Flash
information.
On
There is a device connected to this LAN port.
The modem router is sending or receiving data over this LAN
Flash
port.
Off
There is no device connected to this LAN port.
No storage device or printer is plugged into the USB port.
Off
On
A storage device or printer has connected to the USB port.
for more information about how to make Internet connection correctly. If
1. If your ADSL LED is GREEN ON, please check your Internet
4.7.2 WPS Settings
5
for more
2.3 Connecting
ISP to make sure if your