How To Set Up And Test Basic Wireless Connectivity - NETGEAR DG834GUv5 Reference Manual

54 mbps wireless adsl modem router
Hide thumbs Also See for DG834GUv5:
Table of Contents

Advertisement

Table 4-1.
Wireless Security Options
Field
Description
WPA-802.1x
User authentication is implemented using 802.1x and RADIUS servers. For a full
explanation of WPA, see
Fill in the following:
• Radius Server Name/IP Address
This field is required. Enter the name or IP address of the Radius Server on your LAN.
• Radius Port
Enter the port number used for connections to the Radius Server.
• Radius Shared Key
Enter the desired value for the Radius shared key. This key enables the DG834G to
log in to the Radius server and must match the value used on the Radius server.

How to Set Up and Test Basic Wireless Connectivity

Follow the instructions below to set up and test basic wireless connectivity. Once you have
established basic wireless connectivity, you can enable security settings appropriate to your needs.
1. Log in to the DG834G firewall at its default LAN address of http://192.168.0.1 with its default
user name of admin and default password of password, or using whatever LAN address and
password you have set up.
2. Click the Wireless Settings link in the main menu of the DG834G firewall.
3. Choose a suitable descriptive name for the wireless network name (SSID). In the SSID box,
enter a value of up to 32 alphanumeric characters. The default SSID is Wireless.
Note: The SSID of any wireless access adapters must match the SSID you configure in the 54
Mbps Wireless ADSL Modem Router Model DG834G. If they do not match, you will not get
a wireless connection to the DG834G.
4. Set the Region. Select the region in which the wireless interface will operate.
5. Set the Channel. The default channel is 11.
This field determines which operating frequency will be used. It should not be necessary to
change the wireless channel unless you notice interference problems with another nearby
wireless router or access point. Select a channel that is not being used by any other wireless
networks within several hundred feet of your firewall. For more information on the wireless
channel frequencies please refer to
Wireless Configuration
"Wireless Communications:" on page
"Wireless Communications:" on page
v3.0, September 2005
DG834G Reference Manual
A-1.
A-1.
4-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dg834g

Table of Contents