NETGEAR DG834GUv5 Reference Manual page 195

Figure C-17: Security Policy Editor security policy
Select the Main Mode in the Select Phase 1 Negotiation Mode check box.
c.
Configure the VPN Client Identity.
4.
In this step, you will provide information about the remote VPN client PC. You will need to
provide:
— The Pre-Shared Key that you configured in the DG834G.
— Either a fixed IP address or a "fixed virtual" IP address of the VPN client PC.
In the Network Security Policy list on the left side of the Security Policy Editor
a.
window, click My Identity.
NETGEAR VPN Configuration
v3.0, September 2005
DG834G Reference Manual
C-21