NETGEAR DG834GUv5 Reference Manual page 75

To install Home Network Security, click the Trend Micro banner and then follow the on-screen
instructions. For assistance, refer to the Home Network Security Quick Start Guide included on the
NETGEAR Resource CD. (You can download this document and the Home Network Security
User's Guide at http://www.trendmicro.com/en/support/tmss/netgear.)
• Enable Trend Micro Security Services. Select this check box and then click Apply to enable
the Security Service features on this page (automatic updates and Client Virus Protection
Status information).
• Automatically check for update components. Select this check box to automatically check
for updates to Trend Micro scanning components. Choose the desired checking interval from
the list, and then click Apply.
Note: If your ISP bills by the amount of time or traffic you use, set the update frequency to
once a day.
• Client Virus Protection Status. Provides information on all computers on your network.
– IP Address: The computer's IP address
– Computer Name: The name of the computer (as shown in Control Panel > System)
– Antivirus Software: The type of antivirus software installed on the computer
– Virus Def. File Version: The version of the virus pattern file in use by the antivirus
software
– Scan Engine: The version of the scan engine in use by the antivirus software
– Status: Indicates if the virus pattern file or scan engine require updating (if no recognized
antivirus software is found, the status is "Potential Threat")
Protecting Your Network
v3.0, September 2005
DG834G Reference Manual
5-17