Testing Basic Wireless Connectivity - NETGEAR N150 Setup Manual

To access the Internet from any computer connected to your wireless router, launch a browser such
as Microsoft Internet Explorer or Netscape Navigator. You should see the wireless router's
Internet LED blink, indicating communication to the ISP.
If you are planning a mixed network of WPS capable devices and non-WPS capable
devices, NETGEAR suggests that you set up your wireless network and security
settings manually first, and only use WPS for adding the WPS capable devices.
For more information on setting up your wireless network and configuring your wireless security
settings, see the online User Manual.

Testing Basic Wireless Connectivity

Once you have established basic wireless connectivity, you can enable security settings
appropriate to your needs.
To set up and test basic wireless connectivity:
Log in to the wireless router at its default LAN address of http://Default IP Address
1.
Variable with its default user name of admin and default password of password, or using
whatever LAN address and password you have set up.
Click Wireless Settings in the main menu.
2.
Note whatever SSID you have set up.
3.
The SSID of any wireless adapters must match the SSID you configure in the
wireless router. If they do not match, you will not get a wireless connection. If
you are configuring the Product Family from a wireless computer and you
change the Product Family's SSID, channel, or security settings, you will lose
your wireless connection when you click Apply. You must then change the
wireless settings of your computer to match the Product Family's new settings.
Configure and test your computers for wireless connectivity.
4.
Program the wireless adapter of your computers to have the same wireless network name
(SSID) as the wireless router. Check that they have a wireless link and are able to obtain an IP
address by DHCP from the Product Family.
Configuring Your Wireless Network 26