How To Configure Wep - NETGEAR DG834GUv5 Reference Manual

If WEP is enabled, you can manually or automatically program the four data encryption keys.
These values must be identical on all computers and access points in your network.
There are two methods for creating WEP encryption keys:
• Passphrase. Enter a word or group of printable characters in the Passphrase box and click the
Generate button.
• Manual. 64-bit WEP: Enter 10 hexadecimal digits (any combination of 0-9, a-f, or A-F).
128-bit WEP: Enter 26 hexadecimal digits (any combination of 0-9, a-f, or A-F).
Select the radio button for the key you want to make active.

How to Configure WEP

To configure WEP data encryption, follow these steps:
1. Log in to the DG834G firewall at its default LAN address of http://192.168.0.1 with its default
user name of admin and default password of password, or using whatever LAN address and
password you have set up.
2. Click the Wireless Settings link in the main menu of the DG834G ADSL modem router.
3. Go to the Security Encryption portion of the page:
Figure 4-6
4. Select the Authentication Type.
5. Select the Encryption setting.
Wireless Configuration
v3.0, September 2005
DG834G Reference Manual
4-13