How To Set Up And Test Basic Wireless Connectivity - NETGEAR WGR614 v7 Setup Manual

Router Setup Manual
2. For security reasons, the router has its own user name and password. When prompted, enter
for the router user name and
admin
letters.
Note: The router user name and password are not the same as any user name or
password you may use to log in to your Internet connection.
A login window like the one shown below opens:
Figure 1-9
Enter the user name and password. The router will display its home page.
When the router is connected to the Internet, click the Knowledge Base or the Documentation link
under the Web Support menu to view support information or the documentation for the router.
If you do not click Logout, the router will wait 5 minutes after there is no activity before it
automatically logs you out.

How to Set Up and Test Basic Wireless Connectivity

Follow the instructions below to set up and test basic wireless connectivity. Once you have
established basic wireless connectivity, you can enable security settings appropriate to your needs.
1. Log in to the router at its default LAN address of http://192.168.1.1 with its default user name
of admin and default password of password, or using whatever LAN address and password
you have set up.
2. Click the Wireless Settings link in the main menu of the router.
1-10
for the router password, both in lower case
password
Connecting the Router to the Internet
v1.0, 2006-01-17