Outbox-Messages Waiting To Be Sent; View Messages On A Sim Card; Messaging Settings - Nokia N91 - Smartphone 30 MB User Manual

previously retrieved e-mail headings, the retrieved e-mail
messages, or both. You can also write new, reply to, or
forward e-mail to be sent the next time you connect to
the mailbox.
Outbox—messages waiting to be
sent
Outbox is a temporary storage place for messages waiting
to be sent.
Status of the messages in
Sending—A connection is being made, and the message is
being sent.
Waiting/Queued—The message will be sent when
previous messages of a similar type have been sent.
Resend at (time)—The device will try to send the message
again after a time-out period. Select
sending immediately.
Deferred—You can set documents to be on hold while
they are in Outbox. Scroll to a message that is being sent,
and select Options
Failed—The maximum number of sending attempts has
been reached. Sending has failed. If you were trying to
send a text message, open the message, and check that
the Sending options are correct.
60 Copyright © 2006 Nokia. All rights reserved.
Outbox are as follows:
Send to restart the
> Defer sending.
Example: Messages are placed in the outbox, for
example, when your device is outside network coverage.
You can also schedule e-mail messages to be sent the next
time you connect to your remote mailbox.

View messages on a SIM card

Before you can view SIM messages, you must copy them to
a folder in your device.
1
In the Messag. main view, select
messages.
2
Select Options > Mark/Unmark
mark messages.
3 Select Options > Copy. A list of folders opens.
4
To start copying, select a folder and OK. To view the
messages, open the folder.

Messaging settings

Fill in all fields marked with
asterisk. Follow the instructions given by your service
provider. You may also obtain settings from your service
provider in a configuration message.
Some or all message centers, access points or other
settings may be preset for your device by your service
provider or network operator, and you may not be able to
change, create, edit, or remove them.
Options > SIM
> Mark or Mark all
Must be defined or with a red
to