Nokia N91 - Smartphone 30 MB User Manual page 102

You can view, delete, or create these setting profiles in
settings.
Data call
The data call settings affect all access points that use a
GSM data call.
Online time—Set data calls to disconnect automatically
after a time-out if there is no activity. To enter a time-out,
select User defined, and enter the time in minutes. If you
select Unlimited, data calls are not disconnected
automatically.
Wireless LAN
Follow the instructions from your service provider.
WLAN netw. name—Select
for netw.. If you select an existing network,
mode and WLAN security mode
settings of its access point device.
WLAN netw. mode—Select
network and to allow devices to send and receive data
directly; a wireless LAN access point device is not needed.
WLAN security
802.1x (not for ad hoc networks), or WPA/WPA2. If you
select Open network, no encryption is used. The WEP,
802.1x, and WPA functions can be used only if the
network supports them.
102 Copyright © 2006 Nokia. All rights reserved.
Enter manually
are determined by the
Ad-hoc to create an ad-hoc
mode—Select the encryption used: WEP,
SIP WLAN security
security mode:
Security settings for WEP:
Wep key in
create up to four WEP keys. The same settings must be
entered on the wireless LAN access point device.
Authentication
authentication type between your device and the wireless
LAN access point device.
WEP key
key), WEP key format (ASCII
key (the WEP key data in the selected format).
Security settings for
or Search
WLAN netw. WPA mode—Select the means of authentication:
use an extensible authentication protocol (EAP) plug-in, or
Pre-shared key
appropriate settings:
EAP plug-in settings
your service provider instructs.
Pre-shared key
password. The same password must be entered on the
wireless LAN access point device.
TKIP encryption—Select whether Temporal Key Integrity
Protocol (TKIP) is used.
sett.—Enter the settings for the selected
use—Select the WEP key number. You can
type—Select Open or
settings—Enter WEP encryption
or Hexadecimal), and
802.1x and WPA/WPA2:
to use a password. Complete the
(only for EAP)—Enter the settings as
(only for Pre-shared
Shared for the
(length of the
WEP
EAP to
key)—Enter a