Listen To The Radio; View Visual Content - Nokia N91 - Smartphone 30 MB User Manual

You can normally make a call or answer an incoming call
while listening to the radio. The radio is muted when there
is an active call.
The radio selects the used frequency band based on the
country information received from the network. If this
information is not available, you may be asked to select
the region whereyou are located, or you can select the
region in the Visual Radio settings.

Listen to the radio

Note that the quality of the radio broadcast depends on
the coverage of the radio station in that particular area.
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for the
FM radio to function properly.
Press , and select Radio. To start a station search,
select or
frequency manually, select
If you have previously saved radio stations, select
on the display and press the joystick to go to the next
or previous saved station, or press the corresponding
number key to select the memory location of a station.
48 Copyright © 2006 Nokia. All rights reserved.
and press the joystick. To change the
Options > Manual
To adjust the volume, press and hold
side of the device. To listen to the radio using the
loudspeaker, select
To view available stations based on location, select
Options > Station directory
To save the current tuned station to your station list, select
Options > Save
stations, select
To return to the standby mode and leave the FM radio
playing in the background, select
background.

View visual content

To check availability and costs and to subscribe to the
service, contact your network operator or service provider.
To view available visual content for a tuned station, select
or Options
ID has not been saved for the station, enter it, or select
tuning.
Retrieve to search for it in the station directory (network
or service).
When the connection to the visual service is established,
the display shows the current visual content.
To adjust display settings for the visual content view,
select Options
or
Options > Activate loudspeaker.
(network service).
station. To open the list of your saved
Options > Stations.
Options
> Start visual service. If the visual service
> Display settings.
on the left
> Play in