Define A Push-To-Talk Access Point; Push-To-Talk Settings - Nokia N91 - Smartphone 30 MB User Manual

Phone calls always take priority over push-to-talk
activities.

Define a push-to-talk access point

Many service providers require you to use an Internet
access point (IAP) for your default access point. Other
service providers allow you to use a WAP access point.
Contact your service provider for more information.
If you do not have a WAP connection, you may need to
contact your service provider for assistance with the
first-time connection or visit
www.nokia.com/phonesettings.

Push-to-talk settings

Press , and select
Options > Settings. Enter the following information:
User settings:
Incoming PTT calls—Select
notification of incoming calls. Select
want PTT calls to be answered automatically. Select
allowed if you want PTT calls to be rejected automatically.
PTT call alert tone—Select
incoming call alert setting for push to talk to follow your
profile settings. For example, if your profile is silent, push
to talk is set to do not disturb (DND) and, except for
72 Copyright © 2006 Nokia. All rights reserved.
My Own > Push to talk >
Notify if you want to see a
Auto-accept
Set by profile if you want the
callback requests, you are not available to others using
push to talk.
Callback request
requests.
Application start-up—Select if you want to log in to the
Push-to-talk service when you switch on your device.
Default nickname—Enter your default nickname (20
characters maximum) that is displayed to other users. Your
service provider may have disabled this option in your
device. For more information, contact your network
operator or service provider.
Show my PTT address—Select
calls, In all calls, or Never. Your service provider may have
disabled this option in your device. For more information,
contact your network operator or service provider.
Show my login status—Select
status to be shown or
hidden.
Connection settings:
if you
Not
Domain—Enter the domain name obtained from your
service provider.
Access point name—Enter the push-to-talk access point
name. The access point name is needed to establish a
connection to the GSM/GPRS network.
tone—Select a tone for callback
In 1 to 1 calls,
Yes whether you want your
No if you want your status to be
In group