Advertisement
Gently push the lever until it meets the latch on the left side of the
4
drive slot and clicks into place.
Repeat for all remaining disk drives.
5
To maintain proper airflow and cooling, a disk drive or a blank
Note
drive carrier must be installed in every slot of the enclosure.
Connecting to Your Snap Server
Follow the instructions appropriate for your configuration.
Connecting One SANbloc S50 Enclosure
Power off your Snap Server.
1
Use the included 4x SAS cable to connect your Snap Server to the HOST
2
port on the SANbloc S50 enclosure.
Snap Server
SAS Port
7
SANbloc S50 Enclosure
FAULT !
SEP MASTER
HOST Port
SANBloc S50 Quick Install Guide
HOST
EXP
Advertisement
