Advertisement
To expand your configuration with multiple SANbloc S50 enclosures,
2
continue to connect the EXP port of the previous enclosure to the
HOST port of the next enclosure.
Snap Server
SAS Port
You can connect up to seven SANbloc S50 enclosures to a single Snap
Server.
Continue with "Powering On".
3
Powering On
Before you begin, ensure that your Snap Server is powered off.
Use the included power cords to connect each APC unit on each
1
SANbloc S50 to an AC power source. Adaptec recommends that you
use an uninterruptible power supply (UPS) to protect your enclosure,
and that each APC unit be connected to a different UPS on a different
building circuit.
Power on all SANbloc S50 enclosures.
2
9
SANbloc S50 Enclosures
FAULT !
FAULT !
HOST Port
SANBloc S50 Quick Install Guide
HOST
EXP
SEP MASTER
HOST
EXP
FAULT !
SEP MASTER
HOST
EXP
SEP MASTER
EXP Port
Advertisement
