Replacing The Thermal Module - Packard Bell EasyNote DT85 Service Manual

Replacing the thermal module

Note:
The thermal module in this sample is for the discrete model. For the UMA model, the thermal module have
four captive screws.
70
CHAPTER 3: Replacing notebook components
Tools you need to complete this task:
Flat-blade driver
Phillips #0 screwdriver
To replace the thermal module:
1
Complete the steps in
2
Complete the steps in
3
Disconnect the cooling fan cable from its system board connector.
- OR -
"Preparing the notebook" on page
"Removing the bay cover" on page
Scribe or non-marring tool
51.
55.