Packard Bell EasyNote DT85 Service Manual page 92

86
CHAPTER 3: Replacing notebook components
14
Position the new LCD panel assembly on the notebook, and then secure it
with the hinge screws removed in
15
If the notebook has a wireless card installed, proceed to
the antenna cables.
16
If there's no wireless card installed, proceed to
17
Refer to the antenna cable routing note made on
antenna cables to the palm rest before pulling the ends downward to the
notebook base.
18
Arrange the LCD and microphone cables on the palm rest and reconnect
them to their system board connectors.
19
Close the LCD panel and turn the notebook over so the base is facing up.
20
If the notebook has a wireless card installed, reconnect the antenna cables
and then reinstall the bay cover.
21
Return the base hinge screws removed in
22
Turn the notebook over so the palm rest is facing up.
23
Reinstall the keyboard cover by following the instructions in
keyboard cover"
24
Reinstall the keyboard by following the instructions in
keyboard" on page
25
Reinstall the battery.
step
procedure on page 79.
77.
12.
step 17
step 18 .
step 10 and secure the
step 6.
"Replacing the
to arrange
"Replacing the