Table of Contents
Advertisement
Startup Configuration
The Startup Configuration sub-menu contains parameter values that define
how your computer behaves on system startup.
The following table describes the parameters in this sub-menu. Settings in
boldface are the default and suggested parameter settings.
Parameter
Boot Display
USB Function
Support
Hotkey Beep
ACPI OS Fast
Post
Chapter 2
Description
Sets the display on boot-up.
When set to Auto, the computer
automatically determines the display
device when the computer starts up. If an
external display device (e.g., monitor) is
connected, it becomes the boot display;
otherwise, the computer LCD is the boot
display. When set to Both, the computer
outputs to both the computer LCD and an
external display device if one is
connected.
Enables or disables the Universal Serial
Bus (USB) port.
Enables or disables a system beep when
a hotkey or key combination is pressed.
ACPI OS Fast Post allows your computer
to boot up and resume from Standby/
Hibernation/Sleep mode faster. When
enabled, allows the operating system
(with ACPI) and BIOS to communicate
information about Plug-and-Play
resources and previous boot-ups.
Options
Auto or Both
Disabled or
Enabled
Enabled or
Disabled
Disabled or
Enabled
47
Advertisement
Table of Contents
