Startup Configuration - Acer TravelMate 630 Service Manual

Startup Configuration

The Startup Configuration screen contains parameter values that define how your computer behaves on
system startup.
Information
CPU Speed
Legacy Diskette A:
>Primary Master
>Secondary Master
>I/O Device Configuration
>PCI IRQ Routing
USB Host Controller:
USB BIOS Legacy Support:
F1 Help
Esc Exit
The following table describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings.
Parameter
CPU Speed
Legacy Diskette A
Primary Master
Secondary Master
I/O Device Configuration
PCI IRQ Routing
USB Host Controller
Chapter 2
PhoenixBIOS Setup Utility
Main Advanced
[High]
[1.44/1.25MB 3 ½"]
[TOSHIBA MK2018GAP-(PM)]
[MATSHITADVD-ROM SR-81]
[Enabled]
[Enabled]
"#$ Select Item
-/+ Change Values
%& %& %& Select Menu %&
Enter Select > Sub Menu
Set CPU high speed or low speed.
Help: Selects floppy type. Note that 1.25MB 3 1/2"
references a 1024 byte/sector Japanese media
format. The 1.25MB, 3 1/2" diskette requires a 3-Mode
floppy-disk drive.
Show Primary Master HD size.
User can enter submenu to set some detail functions
Show Secondary Master Device Status.
User can enter submenu to set some detail functions.
Enter submenu to set onboard device configuration
Help: Pheripheral Configuration.
Set Default IRQ of PCI device.
Help: Menu used to setting IRQ for PCI Devices.
Set Enabled or Disabled the USB hardware
Help: Disabled resources will be freed up for other
uses.
Security Boot Exit
Description
Item Specific Help
Temporary solution
F9 Setup Defaults
F10 Save and Exit
Options
High or Low
Options: 1.44/1.25MB 3 1/2"
or Disabled
Auto or None or User or CD-
ROM or ATAPI Removable or
IDE Removable
Auto or None or User or CD-
ROM or ATAPI Removable or
IDE Removable
Enabled or Disabled
35