1. Manuals
  2. Brands
  3. Acer Manuals
  4. Laptop
  5. Extensa 355
  6. User manual

Acer Extensa 355 User Manual

Hide thumbs Also See for Extensa 355:
Table of Contents

Advertisement

Quick Links

Download this manual
Extensa 355
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Acer Extensa 355

Summary of Contents for Acer Extensa 355

  • Page 1 Extensa 355 User’s Manual...
  • Page 2 Acer Incorporated to notify any person of such revision or changes. Acer is a registered trademark of Acer Incorporated. Extensa is a registered trademark of Acer Incorporated. Microsoft, MS-DOS, Windows and Windows 95 are registered trademarks of Microsoft Corporation.
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS Read these instructions carefully. Save these instructions for future reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water.
  • Page 4 11. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. 12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power cord or plug is damaged or frayed If liquid has been spilled into the product...
  • Page 5 Canadian Department of Communications Regulatory Statement This digital apparatus does not exceed Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n'émet pas de bruits radio-électriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le brouillage radioélectrique édicté...
  • Page 6 FCC Class B Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 7 About This Manual Purpose This manual discusses the features of the notebook and tells how to use and configure it. This manual, along with the online help, should familiarize you with all aspects of the notebook computer. Manual Structure This manual consists of eight chapters and one appendix: Chapter 1, Getting Started, tells you how to get started with the notebook.
  • Page 8 Conventions The following conventions are used in this manual: Represent text input by the user, default settings C:\setup, [Enabled], etc. and recommended selections Denotes actual messages that appear on screen message displayed NOTE Gives bits and pieces of additional information related to the current topic WARNING Alerts you if damage may result from doing or...

  • Page 9: Table Of Contents

    T a b l e o f C o n t e n t s Getting Started Item Checklist ..................1-1 Taking Care of Your Computer.............. 1-2 1.2.1 Notebook .................. 1-2 1.2.2 AC Adapter................1-2 1.2.3 Battery Pack ................1-3 1.2.4 Cleaning and Servicing.............
  • Page 10 Ports ....................2-14 2.7.1 Rear Ports ................2-14 2.7.2 PC Card Slots................. 2-15 Audio ....................2-17 Securing your Notebook ..............2-18 2.9.1 Security Notch ................ 2-18 2.9.2 Passwords ................2-18 Power Battery Pack ..................3-1 3.1.1 Battery Pack Characteristics ............. 3-1 3.1.2 Removing and Installing the Battery Pack.........
  • Page 11 Options External Monitor..................4-1 External Keyboard and Keypad ............. 4-2 External Pointing Device............... 4-3 Printer ....................4-4 Audio Devices..................4-5 PC Cards ....................4-6 Miscellaneous Options ................4-6 4.7.1 Additional Power Packs ............4-6 4.7.2 Cables ..................4-6 4.7.3 Optional External CD-ROM Drive ..........4-8 Key Component Upgrades ..............
  • Page 12 6.1.4 System Security ............... 6-6 6.1.5 Power Management Settings ............ 6-7 6.1.6 Load Default Settings ............... 6-9 Traveling with the Notebook Traveling Preparations ................7-1 International Traveler’s Warranty ............7-3 Worldwide Support................7-6 Troubleshooting Q&A...................... 8-1 Error Messages ..................8-5 Specifications...

  • Page 13: Getting Started

    C h a p t e r 1 Getting Started This notebook supports high-end Pentium™ processor, packing power of a desktop PC into a slim and lightweight notebook. Combining performance, versatility, and a host of advanced power-management features, it helps you work with unmatched productivity and ease.

  • Page 14: Taking Care Of Your Computer

    Taking Care of Your Computer Your computer will serve you well if you take care of it. This section tells you how to care for the notebook. Also, re-read the important safety instructions at the beginning of this manual. 1.2.1 Notebook •...

  • Page 15: Battery Pack

    • The total ampere ratings of the equipment plugged in should not exceed the ampere rating of the cord if you are using an extension cord. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating. 1.2.3 Battery Pack •...

  • Page 16: Diskettes

    1.2.5 Diskettes Following are some tips on diskette management: • Always make backup copies of diskettes that contain important data or program files. • Keep diskettes away from magnetic fields and sources of heat. • Avoid removing a diskette from a drive when the floppy drive activity light is on.

  • Page 17: Connecting The Notebook

    Connecting the Notebook After reading through the previous section, you are now ready to experience your new notebook. Connecting the notebook is as easy is 1-2-3. Inserting the Battery Pack Insert the battery pack into the battery compartment and slide the battery compartment cover in place.
  • Page 18 Creating Backup Disks The system utility software is an integrated package of useful utilities for your notebook computer. You should create a backup whenever possible. To create backup disks, follow these steps: In Windows95, click on Start Select Programs Accessories System Tools Select Create System Disks...

  • Page 19: System Tour

    C h a p t e r 2 System Tour This chapter gives an in-depth “tour” of the notebook’s many features. Features The notebook was designed with the user in mind. Here are just a few of the notebook’s many features: Performance •...
  • Page 20 Multimedia • 16-bit high quality audio • Built-in speaker • Line in, mic-in and line out ports Human-centric Design and Ergonomics • Lightweight and slim • Full-sized keyboard • Wide and curved palm rest • Centrally-located touchpad pointing device Expansion •...

  • Page 21: Display

    Display The large DualScan STN color graphics display offers excellent viewing, display quality and desktop performance graphics. With built-in PCI bus VGA display system to support both the internal LCD display and the external optional VGA monitor with 1MB RAM video memory. The notebook’s large display and multimedia capabilities are great for giving presentations.
  • Page 22 Microswitch To close the lid, fold it down gently until the display lid latch clicks into place. To avoid damaging the display, do not slam it when closing. Do not place any object on top of the notebook when the display is closed.

  • Page 23: Interior Features

    Interior Features Standby/Hibernation button No-reboot Setup button Battery Charging Power Indicator Power Switch Status indicator 2.3.1 Control Buttons Icon Function Description Power Switch Toggle system power on and off. No-reboot Gains access to BIOS setup utility’s advanced power Setup management settings and system information reference screens.

  • Page 24: Status Indicator

    2.3.2 Status Indicator Icon Function Description Battery charging It lights up when the battery is charging. indicator Power indicator This lights up when power is applied to the notebook, and flashes when the notebook is in a battery-low condition. Standby mode This flashes when the system is in standby mode indicator (Standby/Hibernation mode).

  • Page 25: Keyboard

    Keyboard The keyboard has full-sized keys that include a separate cursor keys, two Windows 95 keys and twelve function keys. 2.4.1 Special Keys The keyboard has three lock keys which you can toggle on and off. Lock Key Description Caps Lock When Caps Lock is on, all alphabetic characters typed are in uppercase.
  • Page 26 The embedded keypad functions like a desktop numeric keypad. It is indicated by small characters located on the upper right corner of the keycaps. To simplify the keyboard legend, the cursor-control key symbols are not printed on the keys. Desired Access Num Lock On Num Lock Off Number keys on...

  • Page 27: Hot Keys

    2.4.2 Hot Keys The notebook employs hot keys or key combinations to access most of the notebook’s controls like screen contrast and brightness, volume output and the BIOS setup utility. Hot Key Function Description Fn-Esc Hotkey Escape Exits the hotkey control. Fn-F1 Hotkey Help Displays the hotkey list and help.

  • Page 28: Keyboard Ergonomics

    Hot Key Function Description Press the scale hotkeys (Fn-→ → , Fn-← ← ) to increase Fn-F5 Volume Control and decrease the output level. Fn-→ Scale Increase Increases the setting of the current icon. Fn-← Scale Decrease Decreases the setting of the current icon. Activating and Using Hot Keys When activating hot keys, press and hold the first key Fn before pressing the other keys in the hot key combination.

  • Page 29: Touchpad

    Touchpad The built-in touchpad is an PS/2-compatible pointing device that senses movement on its surface. This means the cursor responds as you move your finger on the surface of the touchpad. The central location on the palm rest provides ample comfort and support. The touchpad works with most mouse drivers, but the bundled touchpad driver supports special functions that work uniquely with the touchpad.
  • Page 30 Function Left Button Right Button Execution Click twice Tap twice (at the same speed as quickly double-clicking the mouse button) Selection Click once Tap once Drag Click and Tap twice (at the same speed as hold to drag double-clicking the mouse button) the cursor and hold finger to the touchpad on the second tap to drag the cursor...

  • Page 31: Storage

    Storage High-capacity storage comes in the form of a 2.5-inch Enhanced-IDE hard disk. The notebook also has an internal 3.5-inch, 1.44MB floppy drive. You can also connect an optional external CD-ROM drive. See section 4.7.3 for more information. System Tour 2-13...

  • Page 32: Ports

    Ports Ports allow you to connect peripheral devices to your notebook computer as you would with a desktop PC. The ports are found on the rear panel; PC card slots are found on the left panel of the notebook. See Chapter 4 on how to connect external devices to the notebook.

  • Page 33: Pc Card Slots

    Icon Port Connects to... Line-in Port Line-in device (e.g., audio CD player, stereo walkman) Microphone-in Port External 3.5mm minijack condenser microphone Line-out Port Line-out device (e.g., speakers, headphones) 2.7.2 PC Card Slots There are two type II or one type III PC Card slots found on the left panel of the notebook.
  • Page 34 If the notebook detects a PC I/O card (e.g., modem card) installed in the PC card slots, the notebook can only enter standby mode, and not hibernation mode. Ejecting a Card Exit the application using the card, then follow these steps: Press the slot eject button to eject the card.

  • Page 35: Audio

    Audio Standard notebook configuration includes 16-bit stereo audio which is compatible with Sound Blaster and Sound Blaster Pro. A single speaker found on the right side of the palm rest direct sound towards you which allows for excellent sound output. Built-in Speaker Besides the built-in speaker, there are audio ports on the rear panel of the notebook.

  • Page 36: Securing Your Notebook

    Securing your Notebook Security features include hardware and software locks — a security notch and a two-level password scheme. 2.9.1 Security Notch A security notch located on the rear panel of the notebook lets you connect a Kensington-compatible key-based computer security lock. Circle or wrap a computer security lock cable around an immovable object such as a table or locked...

  • Page 37: Power

    C h a p t e r Power The notebook operates on AC or battery power. This chapter contains the information you need to know to operate the notebook on battery power. It also includes information about the power management system. Battery Pack The notebook uses a battery pack that gives you long use between charges.

  • Page 38: Removing And Installing The Battery Pack

    Currently, there is no defined standard for measuring battery life. Several factors have made it almost impossible to compare the battery life of different notebooks based on specifications alone. These factors include different implementations power saving/management systems, applications in use, the user’s “usage pattern”, hard disk capacity and access frequency, LCD size and brightness.

  • Page 39: Charging The Battery

    Pull on the loop connected to the battery pack and remove the battery pack. Installing the Battery Pack The following figure shows how to install the battery pack. Nickel-Metal Hydride Insert the battery pack into the battery compartment. Then slide in the battery compartment cover.

  • Page 40: Checking The Battery Level

    • Rapid mode The notebook uses rapid charging when power is turned off and a powered AC adapter is connected to it. In rapid mode, a fully depleted battery gets fully charged in approximately two hours. • Charge-in-use mode When the notebook is in use with the AC adapter plugged in, the notebook also charges the battery pack if installed.

  • Page 41: Optimizing Battery Life

    3.1.5 Optimizing Battery Life This section helps you get the most out of battery operation. Optimizing battery life prolongs the charge/recharge cycle and improves recharge efficiency. Follow these suggestions to optimize and maximize battery power: • Purchase an extra battery pack. •...

  • Page 42: Battery-Low Warning

    3.1.6 Battery-low Warning You never have to worry about battery power as long as you are using the AC adapter. However, when you operate the notebook on battery power, pay extra attention to the warning beeps and the indicator light on the display panel.
  • Page 43 Below are a list of recommended course of action when you encounter a battery-low condition. Situation Recommended Action AC adapter and power 1. Connect the AC adapter to the system. outlet available 2. Save all necessary files. 3. Resume work. Power off the notebook if you wish to recharge the battery rapidly.

  • Page 44: Power Management

    Power Management This notebook has a built-in power management unit that monitors system activity. System activity refers to any activity involving one or more of the following devices: keyboard, mouse, floppy drive, hard disk, peripherals connected to the serial and parallel ports, and video memory. If no activity is detected for a specified period of time (called an inactivity time-out), the system switches to one of the power-saving modes to conserve energy.
  • Page 45 If the LCD backlight is too bright, the system automatically adjusts it to a manageable level; otherwise, the level stays the same. If you want a brighter picture, you can then adjust the brightness and contrast level using hotkeys (Fn-F2 If you reconnect AC power to the system, the system automatically adjusts the LCD backlight to its original level —...
  • Page 46 In this situation, there are four ways to enter hibernation mode: • Press the Standby/Hibernation button ( ) with System Sleep Mode set to [Hibernate] • Set a value for the System Sleep Timer in Setup with System Sleep Mode set to .
  • Page 47 Standby Mode The notebook consumes very low power in standby mode. Data remain intact in the system memory until battery is drained. There are four ways to enter standby mode: • Press the Standby/Hibernation button ( ) with System Sleep State set [Standby] •...

  • Page 48: Advanced Power Management (Apm)

    To leave standby mode and return to normal mode: • Press any key • Move the active pointing device (internal or external, PS/2 or serial) • Resume Timer is set and matched • Opening the display cover • If an incoming PC card modem event occurs and the Modem Ring Resume On Indicator is enabled, the notebook returns to normal mode.
  • Page 49 Windows 95 To enable APM under Windows 95, follow these steps: Select the Start button, then Settings, then Control Panel. Double-click on the System icon in the Control Panel window. Select the Device Manager tab and double-click on System devices. Double-click on Advanced Power Management support.

  • Page 50: Options

    C h a p t e r 4 Options Your notebook offers excellent expansion capabilities with its built-in ports and connectors. This chapter describes how to connect peripherals and hardware options that help you use your notebook computer with ease. When connecting peripherals, read the manual included with the peripheral for operating instructions.

  • Page 51: External Keyboard And Keypad

    External Keyboard and Keypad This notebook has a keyboard with full-sized keys and an embedded keypad. If you feel more comfortable using a desktop keyboard, you can install a PS/2-compatible external keyboard. You can also use a 17-key numeric keypad for number-sensitive data entry applications.

  • Page 52: External Pointing Device

    External Pointing Device This notebook accepts either a PS/2-compatible or serial mouse or similar pointing device. The built-in touchpad works alternately with an external PS/2 mouse which is hot-pluggable. To use a PS/2-compatible mouse, simply plug it into the PS/2 port ( If you use a serial mouse, open the port cover and plug it into the serial port ).

  • Page 53: Printer

    Printer This notebook supports both serial and parallel printers. For a serial printer, plug the printer cable into a serial port ( ). For a parallel printer, open the port cover and plug the printer cable into the parallel port ( ).

  • Page 54: Audio Devices

    Audio Devices To connect audio devices, plug in an external microphone, a line-in device and amplified speakers or headphones to the microphone-in, line-in and line-out ports, respectively. Options...

  • Page 55: Pc Cards

    PC Cards The notebook has two PC card slots that accommodate two type II or one type III PC card(s). Please consult your dealer for PC card options available that you can purchase for your notebook. Miscellaneous Options You can order spare batteries, AC adapter, 144 Pin 8-/16-/32-MB 64-bit DIMM Modules, external numeric keypad and file transfer cables..
  • Page 56 Connect the single connector end of the Y-bridge cable to the notebook’s PS/2 port and the double connector ends to the two PS/2 devices. Take note of the icons on the double connector before connecting the devices. File Transfer Cable You can use a file transfer cable to transfer data between the notebook and other computers.

  • Page 57: Optional External Cd-Rom Drive

    4.7.3 Optional External CD-ROM Drive The external CD-ROM drive needs a PC Card to work. To use the optional external CD-ROM drive, simply connect the PC Card to the PC Card slot and the other end to the connector on the external CD- ROM drive.

  • Page 58: Key Component Upgrades

    Key Component Upgrades The notebook delivers superior power and performance. However, some users and the applications they use may demand more. This notebook allows you to upgrade your key components when you need increased performance. Contact your authorized dealer if you decide to perform a key component upgrade.
  • Page 59 Installing Memory When installing memory, we recommend you seek the help of a qualified service technician. Improper installation may damage the memory module or the notebook, or cause a malfunction. The memory slots are accessible directly under the keyboard. To install additional memory, follow these steps: 1.

  • Page 60: Hard Disk Upgrade

    3. Then (1) insert the DIMM into the slot and (2) press down to secure the DIMM. 4. Re-attached the metal plate on the memory slot. After installing the memory modules, the system automatically detects and reconfigures the total memory size during the POST routines. 4.8.2 Hard Disk Upgrade You can upgrade your hard disk with a higher capacity drive when you need...
  • Page 61 Use the blank spaces to record additional hard disks that will be available in the future. Upgrading the Hard Disk This notebook has a modular design that enables easy hard disk drive upgrades. We recommend that you seek the help of a qualified service technician if you decide to perform an upgrade.
  • Page 62 4. Lift up the hard disk drive and pull it out. 5. Flip the hard disk drive unit and very carefully disconnect the hard drive cable. The metal housing hard drive separated in order to install a new hard drive. Reverse the process to install a hard disk drive.

  • Page 63: Software

    C h a p t e r 5 Software The following section contain a list of pre-loaded software available with your notebook. Please refer to their on-line help documentation for more information. It is also wise to backup your utility software as early as possible.

  • Page 64: Safeoff

    SafeOff The SafeOFF provides protection from accidental power off. If you accidentally press the power switch, a dialog box pops up for confirmation. • If you select No, the dialog closes and the system does not power off. • If you select Yes, SafeOFF will request Windows 95 to shutdown the computer.

  • Page 65: Setup

    C h a p t e r Setup The notebook has a BIOS (Basic Input/Output System) setup utility that allows you to configure the notebook and its hardware settings. notebook is already correctly configured for you and you do not need to run the BIOS Utility.

  • Page 66: Entering The Bios Utility

    Entering the BIOS Utility Press F2 during POST to enter the BIOS Utility. The BIOS Utility main screen displays. Basic System Settings Basic System Settings Startup Configuration Onboard Devices Configuration System Security Power Management Load Default Settings ↑↓=Move Highlight Bar, ↵=Select, Esc=Exit Read through the BIOS Utility Screen Notes before navigating the BIOS Utility screens.

  • Page 67: Basic System Settings

    • Most of the parameters are self-explanatory. Press F1 for help on individual parameters. • When you press Esc to exit the BIOS Utility, the following prompt appears: Settings have been changed. Do you want to save CMOS settings? [Yes] [No] Select to save the changes you made to the configuration...

  • Page 68: Startup Configuration

    6.1.2 Startup Configuration Terms Description Settings* • Auto* Boot Display If set to Auto and an external display is present, the notebook uses the external display; otherwise, • Both the LCD is the display device. If set to Both, the notebook uses the external display and LCD simultaneously.

  • Page 69: Onboard Devices Configuration

    6.1.3 Onboard Devices Configuration Terms Description Settings • 3F8h* Serial Port Base The serial port can accommodate a Address modem, serial mouse, serial printer, or • 2F8h other serial devices. • 3E8h • 2E8h • 378h* Parallel Port Base The parallel port can accommodate a Address parallel printer or other parallel devices.

  • Page 70: System Security

    6.1.4 System Security Terms Description Settings • Normal* Diskette Drive This parameter allows you to enable Control or disable the read/write functions of • Write Protect All Sectors the floppy drive. • Write Protect Boot Sectors • Disabled • Normal* Hard Disk Drive This parameter allows you to enable Control...

  • Page 71: Power Management Settings

    After setting a password, the notebook sets this parameter to [Enabled] The next time you boot the notebook, resume from hibernation mode or run the BIOS Utility, the password prompt appears. Key in the appropriate password (Power On or Setup). If the password you entered is incorrect, an “X”...
  • Page 72 mouse. Terms Description Settings Hard Disk The hard disk drive enters standby mode if there 1 minute(s) Standby Timer are no disk read/write operations within the period (Valid range: specified by this timer. The hard disk returns to 1 to 15 minutes) normal mode once the notebook accesses it.

  • Page 73: Load Default Settings

    • Disabled* Battery-low condition takes place. You cannot disable the Power management Mode parameter in BIOS Utility if APM is installed under DOS, Windows or Windows 95. To disable APM, type under DOS, Power Off or disable the Power icon in the Windows Control Panel. 6.1.6 Load Default Settings Selecting this option allows you to load all the default settings.

  • Page 74: Traveling With The Notebook

    C h a p t e r Traveling with the Notebook This chapter tells you what to do when traveling with the notebook. This chapter also includes a list of Acer’s worldwide offices and contact information. Traveling Preparations Follow these steps to prepare the notebook for travel: Make diskette copies of important files on the hard disk.

  • Page 75: International Traveler's Warranty

    Simply fill up and return the ITW application form to avail of this unique service. A list of Acer-authorized service sites is available with the ITW form.. Have your ITW card number ready when you call. For updated sites and more information on ITW, see the ITW brochure.

  • Page 76: Worldwide Support

    Worldwide Support If the country you are traveling in does not have an Acer-authorized ITW service site, you can still get in contact with our offices worldwide. World Headquarters Worldwide Operations Acer Incorporated Asia 156 Min Sheng E. Rd. Sec. 3, 6F Taipei, Taiwan 105 R.O.C.
  • Page 77 Beijing, People's Republic of China Facsimile: 61-9-3219534 Telephone: 86-10-6847-2233 Facsimile: 86-10-6847-1101 Acer Computer Australia Pty. Ltd. Unit 7, Kingston Manor Acer Sales & Services Sdn. Bhd. #10 Kennedy St. Level 17 Menara Lion Kingston, ACT 2604 165 Jalan Ampang Telephone: 61-6-239 5939...
  • Page 78 Acer Computer Finland Oy Acer Italy s. r. l. Pihatörmä 1A Via Cassanese 210 02240 Espoo, Finland 20092 Segrate, Milan, Italy Telephone: 358-9-855-0155 Telephone: 39-2-2692-2565 Facsimile: 358-9-855-0166 Facsimile: 39-2-2692-1021 Acer Computer France S.A.R.L. Acer Scandinavia A/S Paris Nord II Kongevejen 62A...
  • Page 79 Acer America/Midwest Latin America Farmington Hills, MI Telephone: 1 (810) 471-2451 Acer Latin America, Inc. Facsimile: 1 (810) 471-2451 1701 N.W. 87 Ave. Miami, FL 33126 Acer America/South Central Telephone: 1 (305) 477-8119 5025 Arapaho Rd., #250 Facsimile: 1 (305) 477-5963...
  • Page 80 You can also contact the local dealer or distributor in the country you are traveling in for assistance. If you are connected to the Internet and have World Wide Web access, visit our home page (http://www.acer.com/) and get an updated list of our worldwide offices, as well as information about our products.

  • Page 81: Troubleshooting

    C h a p t e r Troubleshooting This chapter tells how to deal with common system problems. Read it before calling a technician if a problem occurs. Solutions to more serious problems require opening up the system. Do not attempt to open the system by yourself.
  • Page 82 • Make sure the AC adapter is plugged in properly to the notebook and to the power outlet. If the indicator is lit, check the following: • If the indicator flashes, the notebook is in standby mode. Press any key or tap on the touchpad to resume. •...
  • Page 83 Q: The serial mouse does not work. Do the following: • Make sure that the serial cable is plugged securely into the serial port. • Press the Setup Button ( ) to enter Setup, then press PgDn to see the System Information Reference screen. Check if the serial port is enabled.
  • Page 84 Q: No audio comes out from the notebook. Check the following: • The volume may be muted. In Windows 95, look at the volume control icon on the taskbar. If it is crossed-out, click on the icon and de-select the Mute option. •...

  • Page 85: Error Messages

    Error Messages If you receive an error message, note the message and take corrective action. Table 8-1 lists the error messages in alphabetical order together with the recommended course of action. Error Message Corrective Action CMOS Battery Bad Contact your dealer or an authorized service center.
  • Page 86 Error Message Corrective Action Memory Size Mismatch Enter and then exit the System Configuration Setup in the Setup utility (pressing F2 during POST). Missing operating system Correct the HDD type and reboot. See the specification label pasted on the back side of the notebook or attached to hard disk drive.

  • Page 87: Specifications

    A p p e n d i x Specifications Item Standard Optional Microprocessor P54CSLM 133-/150-MHz ® Pentium processor Main memory EDO (TSOP) 8MB or 16MB Expandable to 40MB or 64-bit memory banks 48MB using 8, 16 and 32MB EDO DIMMs Flash ROM 256KB, shadow RAM BIOS...
  • Page 88 Item Standard Optional Keyboard and 82-/83-key with Windows 95 101-/102-key, PS/2- pointing device keys compatible keyboard or 17-key numeric keypad Touchpad (centrally-located External serial or PS/2 on palmrest) mouse or similar pointing device I/O ports One 9-pin RS-232 serial port Serial mouse, printer or other (16550-compatible) serial devices...
  • Page 89 Item Standard Optional Temperature Operating 10ºC ~ 35ºC Non-operating -20ºC ~ 60ºC Humidity (non-condensing) Operating 20% ~ 80% Non-operating 20% ~ 80% AC adapter 100~240 Vac, 50~60 Hz Extra AC adapter autosensing AC adapter Battery pack Nickel Metal-Hydride battery Extra battery pack Charge time 2 hr.

Table of Contents