Table of Contents
Advertisement
Parameter
Power-on
When set, this password protects the
Password
computer from unauthorized entry. See the
following section for instructions on how to
set a password.
When Password Check on Boot and/or
Password Check During Resume is enabled,
you need to enter this password to continue
operation.
Hard Disk
When set, this password protects the hard
Password
disk from unauthorized access. See the
following section for instructions on how to
set a password.
Disk Drive
When Floppy Drive Lockout is enabled, the
Control
floppy drive connection is stopped and
disabled.
Setting a Password
Follow these steps:
Use the cursor up/down keys to highlight a Password parameter (Setup
or Power-on) and press the Enter key. The password box appears:
Type a password. The password may consist of up to seven characters
(A-Z, a-z, 0-9).
Important: Be very careful when typing your password because the
characters do not appear on the screen.1
Press Enter. Retype the password to verify your first entry and press
Enter.
After setting the password, the computer automatically sets the chosen
password parameter to Present.
Removing a Password
Should you decide to remove a password, do the following:
Use the cursor up/down keys to highlight a Password parameter (Setup
or Power-on).
Use the cursor left or cursor right key to remove the password.
Chapter 2
Description
Options
Disabled or
Enabled
Disabled or
Enabled
Disabled or
Enabled
51
Advertisement
Table of Contents
