Troubleshooting Checklist - Dell 1110 - Laser Printer B/W User Manual

User guide
Table of Contents

Advertisement

In Manual Feed mode, there is no paper in the paper tray. Load paper into the
tray and press
The toner cartridge is nearly empty. Redistribute the toner to temporarily extend
the life of the toner cartridge. If this does not improve print quality, install a new
toner cartridge. See

Troubleshooting Checklist

If the printer is not working properly, consult the following checklist. If the printer does not pass a
step, follow the corresponding troubleshooting suggestions.
Check
Check the power cord and
the power switch.
Make sure that
is on.
Press and hold
to print
a demo page.
Check the demo page to
see if it is printed
correctly.
Print a short document
from a software
application to verify that
the computer and printer
are connected and are
communicating correctly.
If completing the checklist
does not resolve the
printer problem, check the
simplifying the page layout and removing unnecessary graphics from your
document.
to start printing.
"Replacing the Toner
Suggested Solutions
Check the power source by plugging into another outlet.
In Ready mode,
"Understanding the Operator Panel
• If a demo page does not print, check the paper supply in the paper
input tray.
• If the paper jams in the printer, go to
Tray".
If there is a print quality problem, go to
• If the page does not print, check the cable connection between the
printer and the computer.
• Check the print queue or print spooler to see if the printer has been
paused.
• Check the software application to ensure you are using the proper
printer driver and communication port. If printing is interrupted in
progress, go to
"Solving General Printing
Cartridge".
lights green. If
LEDs".
"Solving General Printing
Problems".
lights or blinks green, go to
"Clearing Jams in the Paper
"Solving Print Quality
Problems".
Problems".

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1110

Table of Contents