Dell 1110 - Laser Printer B/W User Manual page 63

LED Pattern Meaning and Suggested Solution
Your printer has some problems. If this problem occurs, contact your service
representative.
• A paper jam has occurred. To solve the problem, see
Paper Tray".
• The front cover is open. Close the front cover.
• The top cover is open. Close the top cover.
• The paper tray is empty. Load paper in the tray. See
• A toner cartridge is not installed. Install a toner cartridge. See
Starter Toner Cartridge".
• If the printer is receiving data,
• If the printer is printing received data,
• You pressed
while the printer was receiving data.
• In Manual Duplex mode, the first side of your job has printed. Load the paper
back into the tray and press
Both Sides of Paper (Manual
You print in 600dpi resolution and your printer does not have enough memory to
print the current job. When the Printing Status window appears, select one of
the following options.
• Click Cancel. An Internal error sheet prints and the current job automatically
clears. Try simplifying the page layout and removing unnecessary graphics
from your document.
• Click Print. Your printer prints the current job in 300 dpi resolution. If a
memory shortage occurs again, the Printing Status window will appear again
and an Internal error sheet will print. The current job automatically clears. Try
blinks green slowly.
blinks green quickly.
to start printing. For details, see
Duplex)".
"Clearing Jams in the
"Loading Paper".
"Installing the
"Printing on