Sharp PC-AL27 - Actius AL27 - Mobile Athlon 64 1.6 GHz Operation Manual page 83

Removing LAN cable
1. Turn off the computer.
2. Press and hold the connector tab of the LAN cable and then, pull out the cable.
4
Configuring LAN Unit
1. Click start - Control Panel.
2. Click Network and Internet Connections; then, Network Connections. If the
Classic view is selected, double-click the Network Connections icon.
3. Right-click Local Area Connection.
4. From the pop-up menu, click Properties.
5. In the Local Area Connection Properties dialog box, set the network setting
according to the instruction of your network administrator.
Make sure to log on the computer as a member of the Computer
administrators group. Otherwise, you cannot set or change some settings
for the LAN unit.
If you cannot access the network,
1. Click start - Control Panel.
2. Click Performance and Maintenance; then, System. If the Classic view is
selected, double-click the System icon.
3. Click the Hardware tab; then, the Device Manager button.
4-6
Before pulling the LAN cable out of the LAN jack, be sure to release the
connector of the LAN cable by pressing the connector tab. Excessive
force may damage the tab.
Connector Tab