Sharp PC-AL27 - Actius AL27 - Mobile Athlon 64 1.6 GHz Operation Manual page 42

Creating DVD Video
The following steps show how to write images taken by digital camera onto CD-R
using the Ulead DVD MovieFactory.
1. Turn on your video device and set it to playback mode.
• Confirm it is in playback mode.
1
• Make sure that the media is ready for playback in the video device.
2. Connect it to the computer. (Refer to the IEEE1394 Device section of
Chapter 3.)
3. Select Make a DVD in the Digital Video Device window and click OK to run the
Ulead DVD MovieFactory 3 SE.
4. Insert a new DVD-R into the optical drive. If you have the message "What do
you want Windows to do?", click Cancel.
5. Click Direct to Disc in the menu box.
6. Select DVD in the Output disc format field and then, click Next.
7. Select DVD-Video and then, click OK.
8. Select the connected device from the Source pull down menu.
9. Select Full DV tape from the Capture mode pull down menu.
10. Click (
11. When the capture is completed, select Close and then, click OK.
12. Remove the DVD-R and close the optical drive.
1-18
When you run the application for the first time, the Registration window
opens. To avail of support service for Ulead DVD MovieFactory 3 SE,
you need to make a registration with Ulead. Register now or later.
) button to start capture.
The confirmation window for the capture duration may appear. Read the
message and follow the instruction.
The optical drive will automatically open.