Setup Utility; Running Setup Utility - Sharp PC-AL27 - Actius AL27 - Mobile Athlon 64 1.6 GHz Operation Manual

Setup Utility

This chapter describes how to run the Setup Utility to change settings on the
computer.

Running Setup Utility

With the Setup Utility, you can customize the system configuration information, such
as time and date, port assignments, or passwords. The information you have specified
is saved in a special area called CMOS RAM, which the system reads every time you
turn on the computer. The computer is shipped from the factory with the appropriate
setting of the Setup Utility. Leave it as default in normal use.
Contents of Setup Utility
The Setup Utility consists of four menu pages, as follows:
•
Main: Configures basic setting
•
Advanced: Configures device interface
•
Security: Sets Passwords
•
Exit: Exits the Setup Utility or returns to the default values
Entering and Exiting Setup Utility
1. Turn on the computer.
2. When <F2> to enter System Configuration Utility appears, press F2.
3. Change to the desired settings. Refer to the next section.
4. Select Exit menu; then, press Enter.
5. Select one of the exit methods, and press Enter.
6. Confirm the message and press Enter again. The system restarts.
CHAPTER 5
5
5-1