Sharp PC-AL27 - Actius AL27 - Mobile Athlon 64 1.6 GHz Operation Manual page 58

Supporting System Hibernate
2
Confirm that the system hibernate is supported with the following steps.
1. In the Power Options Properties dialog box, select the Hibernate tab.
2. Confirm the box of Enable hibernation is checked.
3. Click OK.
4. Close the Control Panel window.
Set Timer to Enter System Standby/Hibernate Automatically
The computer will enter the system standby/hibernate automatically when the
specified time has passed without any operation. To set the time:
1. In the Power Options Properties dialog box, select the Power Schemes tab.
2. From the pull-down menu of the System standby or/and System hibernates, select
the elapsed time before the computer automatically enters the system
standby/hibernate.
3. Click OK.
4. Close the Control Panel window.
Entering System Standby/Hibernate
The computer enters the system standby/hibernate in each of the following cases:
•
You select Stand By or Hibernate (which will replace Stand By if your press Shift
key) in the Turn off computer dialog box. To open the dialog box, click start – Turn
Off Computer.
2-10
Select your user account if Windows requires when the computer resumes
from the system standby/hibernate.
If your battery becomes completely discharged during the system
standby, you will lose unsaved data and will need to reboot the computer.
Therefore, if you are planning to leave the computer powered by battery
for long periods of time, we recommend the system hibernate.