Sharp PC-AL27 - Actius AL27 - Mobile Athlon 64 1.6 GHz Operation Manual page 32

4. Clear the box of Disable internal pointing device when external USB pointing
device is attached.
5. Click OK to close the dialog box.
6. Close the Printers and Other Hardware dialog box.
Completing the steps allows the computer always to respond to the glide pad, while
the connected USB mouse also works.
1
Using Glide Pad
Take a moment to become familiar with how the glide pad works.
Place Your Fingertip
Place your left or right hand next to the glide pad, resting your wrist naturally in a
relaxed manner. Place your thumb or finger on the glide pad.
Move Your Fingertip
The rectangular pad of the glide pad is used to move the pointer around the display.
As you slide your fingertip across the pad, the pointer on the screen moves in the same
direction across the screen. The glide pad is very sensitive, so you do not have to exert
much pressure on the pad. The glide pad will respond to a light touch from your
fingertip.
Click, Double-click, and Right-click
To click or double-click, you can use the left button just like that of a mouse. Instead
of clicking the left button, you can also just tap gently anywhere on the rectangular
pad. For right-clicking, you must use the right button.
Drag and Drop
You can move the items by using "drag and drop" below:
1. Position the pointer over the item you wish to move.
2. Press the left button; do not release it.
1-8
When the glide pad is disabled, the touch pad icon (
crossed ( ).
If the interval between clicks is too long, the double-clicking will not
work.
) on the taskbar is