Spinning; Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele W 5964 WPS Operating Instructions Manual

Spinning

Final spin speed

Programme
Cottons
Minimum iron
Delicates
Woollens
Hygiene
Express 20
Freshen up
Automatic plus
Shirts
Denim
Dark garments
Drain / Spin
Steam care
Sportswear
Trainers
Outerwear
Proofing
Soft toys
First wash
Silks
Pillows
Curtains
Separate rinse
Starch
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
30

Rinse and interim spin

There is a spin after the main wash and
rpm
between the rinses. A reduction in the
1600
final spin speed will also reduce the
1200
interim spin speed. In some
600
programmes, an additional rinse is
1200 introduced if a spin speed of less than
700 rpm is selected.
1600
1600

To omit the final spin (Rinse hold)

–
^ Press the Further extras 4 button
1200
and select the Rinse hold option.
600
– To start the final spin and end the
900
programme:
1200
The washing machine will display the
1600
maximum spin speed possible. You
–
can use the X button to select a
1200
lower spin speed. Start the final spin
1000
by pressing the Start/Stop button.
800
– To end the programme without the
1000
final spin:
900
Press the Door button. The water will
1200
drain away. Press the Door button
600
again to open the door.
1200
To omit rinse and interim spin and
600
the final spin (No spin)
1600
^ Select No ..
1600
The laundry is not spun after the final
rinse. The water will drain away and the
machine will go straight into the
anti-crease stage. With some
programmes an additional rinse is
introduced if this setting is selected.