ZyXEL Communications Prestige 2602H-6xC Support Notes page 95

SIP Local Port Use this field to configure the Prestige's listening port for SIP. Leave this
field set to the default if you were not given a local port number for SIP.
SIP Server
Type the IP address of the SIP server in this field.
Address
Enter the SIP server's listening port for SIP in this field. Leave this field set
SIP Server
to the default if your VoIP service provider did not give you a local port
Port
number for SIP.
REGISTER A SIP register server maintains a database of SIP identity-to-IP address
Server (or domain name) mapping. The register server checks your user name
Address and password when you register.
Enter the SIP register server's address in this field.
If you were not given a register server address, then enter the
address from the SIP Server Address field again here.
Enter the SIP register server's listening port for SIP in this field.
REGISTER
Server Port
If you were not given a register server port, then enter the port from
the SIP Server Port field again here.
SIP Service A SIP service domain is the domain name that comes after the @ symbol
Domain in a full SIP URI.
Enter the SIP service domain name in this field.You can use up to 127
ASCII Extended set characters.
Authentication This is the user name for registering this SIP account with the SIP register
User ID server. Type the user name exactly as it was given to you. Use ASCII
characters.
Type the password associated with the user name above. Use ASCII
Authentication
Password Extended set characters.
Select this check box to not show identification information when you make
Block Caller
VoIP calls. Clear this check box to show identification information when
ID
you make VoIP calls.
Apply to Phone 1 and Phone 2 correspond to the Prestige's physical PHONE 1
and 2 ports, respectively. Select whether you want to receive calls for this
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2602H-6xC Support Notes
95