ZyXEL Communications Prestige 2602H-6xC Support Notes page 27

Local IP:
Global IP:
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this screen.
Field Description
Press [SPACEBAR] to toggle through a total of 5 types. These
Type are the mapping types discussed above plus a server type. Some
examples follow to clarify these a little more.
Start This is the starting local IP address (ILA)
Local
This is the ending local IP address (ILA). If the rule is for all
IP
End local IPs, then put the Start IP as 0.0.0.0 and the End IP as
255.255.255.255. This field is N/A for One-to-One type.
This is the starting global IP address (IGA). If you have a
Start
dynamic IP, enter 0.0.0.0 as the Global Start IP.
Global
IP
This is the ending global IP address (IGA). This field is N/A for
End
One-to-One, Many-to-One and Server types.
Note: For all Local and Global IPs, the End IP address must begin after the IP Start address, i.e., you cannot
have an End IP address beginning before the Start IP address.
•
NAT Server Sets
Start= 0.0.0.0
End = N/A
Start= 0.0.0.0
End = N/A
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2602H-6xC Support Notes
Option/Example
One-to-One
Many-to-One
Many-to-Many Overload
Many-to-Many
Overload
Server
0.0.0.0
255.255.255.255
0.0.0.0
200.1.1.64
No
27