ZyXEL Communications Prestige 2602H-6xC Support Notes page 61

•
Apply the first filter set 'NetBIOS_WAN' to the
setup.
Configure the second filter set 'NetBIOS_LAN' by selecting the Filter Set number 2.
•
Rule 1-Source port number 137, Destination port number 53 with protocol number 6 (TCP)
Filter #: 2,1
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 6
Destination: IP Addr= 0.0.0.0
TCP Estab= No
More= No
Action Matched= Drop
Action Not Matched= Check Next Rule
Press ENTER to Confirm or ESC to Cancel:
•
Rule 2-Source port number 137, Destination port number 53 with protocol number 17 (UDP)
Filter #: 2,2
Filter Type= TCP/IP Filter Rule
Active= Yes
Menu 21.2.1 - TCP/IP Filter Rule
IP Source Route= No
IP Mask= 0.0.0.0
Port #= 53
Port # Comp= Equal
Source: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 137
Port # Comp= Equal
Log= None
Menu 21.2.2 - TCP/IP Filter Rule
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2602H-6xC Support Notes
'Output Protocol Filter' in the remote node
61