Front Panel Language; Selecting The Source For Cleaning Pages; Automatic Tray Switching - Xerox Phaser 860 Advanced Features And Troubleshooting Manual

Front panel language

To change the language used for the text on the front panel:
1. On the front panel, with
2. Scroll to
Printer Setup Menu
3. Press the OK key.
4. Scroll to
Set Front Panel
5. Press the OK key.
6. Scroll the desired language.
7. Press the OK key.

Selecting the source for cleaning pages

When one or two High-Capacity Paper Tray Assemblies are installed, the lower tray is the
default source for the cleaning pages that the printer uses in its cleaning procedures. You
can ensure that the printer always uses paper from the lower or middle paper tray in its
self-cleaning procedures by changing a setting in the printer's front panel:
1. With highlighted, press the OK key.
Menus
2. Press the Scroll Down key to scroll to the
3. Press the OK key.
4. Scroll to
Set Cleaning Page
5. Press the OK key.
6. Scroll to the desired tray for the cleaning pages.
7. Press the OK key.

Automatic tray switching

When your printer has one or two high-capacity paper tray assemblies, you can easily run
large jobs without having to replace paper so often. The printer automatically takes paper
from the next tray when the first tray runs out.
For automatic tray switching to work properly, load the same type and size paper in
I
all of the printer's paper trays.
In the printer driver, select Paper as the source, instead of a specific tray.
I
Advanced Features and Troubleshooting Manual
highlighted, press the OK key.
Menus
by pressing the Scroll Up or Scroll Down key.
Language.
Printer Setup
Source.
Printer Management
Menu.
35