Type Of Modem; Initialisation String; Flow Control - 3Com U.S. Robotics 56K Voice User Manual

56k voice faxmodem internal

Hide thumbs Also See for U.S. Robotics 56K Voice:

Table of Contents

Software Installation

Refer to your software manual for the specific installation instructions. The

software's installation program will ask you questions about the modem you are

using. You may need the following information when installing a

communications software package.

Type of Modem

Most voice communications software programs will ask you to select the

type of modem you are using. Select a U.S. Robotics high speed

modem. If that selection is not listed, pick Courier Dual Standard,

V.32bis, or V.34.

For hardware flow control, a fixed serial port rate, and full result codes,

type: AT&F1 and then press ENTER.

If you must use software flow control, type: AT&F2 and then press

ENTER.

For hardware flow control (highly recommended), select RTS/CTS.

For software flow control, select XON/XOFF.

You may need to disable the flow control (hardware or software) that you

are not using.

Congratulations!

You are now ready to start using your

3Com U.S. Robotics modem.

56K Voice Faxmodem Internal - User's Guide

Table of Contents