3Com U.S. Robotics 56K Voice User Manual page 42

PROBLEM: Errors are constantly occurring in your V.17 fax
Your modem initialisation string may be insufficient for fax transmissions.
In terminal mode, type the following initialisation string:
AT&F&H3&I2&R2S7=90 and then press ENTER. The standard string for
faxing is AT&F1S36=0
There may be a Terminate and Stay Resident (TSR) program (such as a
screen saver or virus scanner) running in the background, disrupting data
communications. Disable any Terminate and Stay Resident (TSR)
programs running in the background. If you have software running as a
TSR, check the software's manual for information about disabling its
ability to operate as a TSR.
Your baud rate may be set too high. In your communications software,
lower the baud rate to 9600, 7200, or 4800.
You may be trying to fax a compressed file. Decompress the file using
the application with which it was compressed. Then open it in the
application with which it was created. Select your fax software as the
printer and then print the file.
PROBLEM: Your communications software fails to initialise
Your software's port settings may be incorrect. Make sure the software's
port settings match those for your modem.
Make sure the modem is turned on. An internal modem should turn on
automatically when the computer is turned on.
36 56K Voice Faxmodem Internal - User's Guide
Troubleshooting
transmissions.
POSSIBLE SOLUTION
POSSIBLE SOLUTION
POSSIBLE SOLUTION
POSSIBLE SOLUTION
the modem.
POSSIBLE SOLUTION
POSSIBLE SOLUTION