Installing Other Fax/Data Software; Type Of Modem; Initialization String - 3Com 005683-00 Manual

I
NSTALLING
You can use any other Windows based
fax/data software other than RapidComm. (the
fax/data software on the Connections CD).
Your modem was designed for and tested
using a wide range of communications software
packages. This section will guide you through
some of the details you may need to know
when installing other communications software
packages.

Type of Modem

Most communications software programs will
ask you to select the type of modem you are
using. Select a U.S. Robotics Sportster high
speed modem. If that selection is not listed,
pick Courier Dual Standard, V.32bis, or V.
34.
32
O F /D
THER AX
KEY POINT:
manual for the program's installation
instructions. The software's installation
program will ask you questions about the
modem you are using.

Initialization String

For hardware flow control, a fixed serial port rate
and full result codes, type AT&F1 and press
ENTER. If you must use software flow control,
type AT&F2 and press ENTER.
NOTE:
program to configure your modem, you
must use ATZ for the initialization string.
.
S
ATA OFTWARE
Refer to your software
If you use the Modem Station