HP LC2000r - NetServer - 128 MB RAM Installation Manual page 2

Hp netserver lxr 8500 installation guide: gasket installation
Hide thumbs Also See for LC2000r - NetServer - 128 MB RAM:
Table of Contents

Advertisement

Product Update: HP Netserver LXr 8500 Installation Guide: Gasket Installation (cont.)
4. Slide the top cover to the rear approximately ½ inch and remove it. See Figure 3-8 below.
5. Remove the existing gaskets on each side of the HP Netserver.
6. Place a new twenty-inch gasket 1/16
(Gaskets are supplied in the 900 MHz CPU Upgrade Kit.) See Figure 3-9 below.
HP Part Number 5971-3021
Printed in April 2001
Figure 3-8. Removing Screws and Sliding the Cover Back
th
inch from the edge of the cover slots on each side of the HP Netserver.
Figure 3-9. Place the New Gaskets on Each Side of the Server
'"&$(
'

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LC2000r - NetServer - 128 MB RAM and is the answer not in the manual?

Questions and answers

Table of Contents