HP LC2000r - NetServer - 128 MB RAM Configuration Manual page 3

Disk drives:
RAID arrays
Cables
LANs
LAN connection
NIC:
Model
Driver
No. of NICs
SPU I\O slot
HP 2.1 GB Hot-Swap Ultra SCSI Disk Module D3582C
HP 4.2 GB Hot-Swap Ultra SCSI Disk Module D3583C
HP 4.2 GB 10K rpm Hot-Swap Ultra SCSI Disk Module D4903A
HP 9.1 GB Hot-Swap Ultra SCSI Disk Module D4289A
HP 9.1 GB 10K rpm Hot-Swap Ultra SCSI Disk Module D6019A
HP 18.2 GB Hot-Swap Ultra SCSI Disk Module D5039A
A RAID array (logical disk) must be composed of all the same disk
model. Different size or speed disks are not allowed in the same RAID
array. Any combination of disk models is allowed on a SCSI channel.
Any combination of disk models is allowed in a cluster. RAID arrays
may not span NetRAID Adapters.
HP Cluster Adapter D5957A
Intra-cluster (Heartbeat) LAN
HP D5954A crossover cable or any
equivalent only
The intra-cluster LAN may only be
used for cluster node
communication via a crossover
cable. It may not be used for client
communication.
HP D5013A (10/100TX PCI)
(or HP J3171A)
2.24.00.0000 or later
1
P2
3
Client LAN
Any LAN
Any that is on both the HP
Tested Products List and the
Microsoft Hardware
Compatibility List.
Any driver
If the NIC used is the same as
the Intra-cluster LAN, then
the Client LAN must use the
same driver as the Intra-
cluster LAN.
1 minimum
P1