HP LC2000r - NetServer - 128 MB RAM Configuration Manual page 5

NOTES:
1. Configure cluster using 3 or 4
Rack Storage/8s.
2. Channel 0 and 1 of each NetRAID
Adapter for each LXr must be
connected together through the Rack
Storage/8s as shown on the diagram.
Do not cross channels.
3. The NetRAID Adapters may be
installed in LXr Pro PCI slots P4-P6.
(The diagram depicts using slots P4
and P5.)
4. Cables between servers and shared
storage must be HP D5957A Cluster
Adapters.
Microsoft Cluster Server with Two HP NetRAID Adapters
NetRAID Adapter 1,
Ch. 0 (top)
Ch. 1 (bottom)
NetRAID Adapter 2,
NetRAID Adapter 1,
Ch. 0 (top)
Ch. 0 (top)
Ch. 1 (bottom) Ch. 1 (bottom)
5
NetRAID Adapter 2,
Ch. 0 (top)
Ch. 1 (bottom)