Access The Dialog Box Which Enables You To Set The Grayscale For Images (See P - Canon FAXPHONE L120 Software Manual

Introduction
1
Printing
2
Troubleshooting
3
Appendix
4
Table of Contents
Index
Gutter Settings
Clicking [Gutter] in the [Finishing] tab sheet opens the [Gutter
Settings] dialog box.
[Gutter] Specifies the gutter width in a range
between 0.0 and 1.2 in. (0 and 30 mm).
Quality Tab
Specifies the settings for print quality including the resolution
and contrast.
For more information on [Profile] and [Output Method], refer to
"Profiles," on p. 2-18.
Back Previous
[Objective] Selects the best setting for the print job
according to document content.
[Details] Click this button to open the [Detailed
Settings] dialog box and make print quality
settings (see p. 2-15).
[Manual Grayscale Enables the manual grayscale. Selecting this
Settings] check box enables [Grayscale Settings] to
access the dialog box which enables you to
set the grayscale for images (see p. 2-14).
[Grayscale Click this button after selecting the [Manual
Settings] Grayscale Settings] check box to manually
adjust the grayscale settings. The
[Grayscale Settings] dialog box allows you to
specify Brightness, Contrast, and Matching
Mode (see p. 2-16).
NOTE
This option is enabled only when [Manual Grayscale Settings] is
selected.
TOP
Next
2-14