Canon FAXPHONE L120 Software Manual page 49

Introduction
1
Printing
2
Troubleshooting
3
Appendix
4
Table of Contents
Index
Custom Paper Size Settings
Clicking [Custom Paper Size] in the [Page Setup] tab sheet
opens the [Custom Paper Size Settings] dialog box. This dialog
box enables you to define custom paper sizes for quick selection
and register new custom paper sizes to the [Paper List] box. You
can specify the name, width, and height of each size.
NOTE
This setting is available only when you open the [Canon L120 Printing
Preferences] dialog box from the [Printers and Faxes] (Windows 98/Me/
2000: [Printers]) folder.
[Paper List] Displays the paper sizes actually available.
Selects a paper size from which you can
create a custom paper size.
NOTE
You can share the custom paper sizes with all printers connected
to your computer. Up to 50 sizes can be defined for [Custom
Paper Size].
[Name of Custom Specifies the name of custom paper.
Paper Size]
Back Previous
[Unit] Selects the unit of measurement of paper
size ([Millimeter] or [Inch]).
[Paper Size] Specifies the width and height of the custom
paper.
NOTE
Be sure that [Width] does not exceed [Height] when specifying
the values.
[Register] Registers the custom paper and adds its
name to [Paper List].
NOTE
To register a new custom paper size, be sure to log on as a
member of Administrators (Windows 2000/XP) or Power User
(Windows 2000 only). To change the paper size for the existing
custom paper size, be sure to log on as a member of
Administrators.
[Delete] Removes the selected custom paper from
[Paper List].
NOTE
– You cannot delete a pre-defined paper size or a paper size
selected in the [Page Setup] tab.
– To delete a registered custom paper size, be sure to log on as a
member of Administrators.
TOP
Next
2-34