Canon FAXPHONE L120 Software Manual page 55

Introduction
1
Printing
2
Troubleshooting
3
Appendix
4
Table of Contents
Index
[Matching Mode] Specifies the procedure for color correction.
Driver Matching Mode:
Processes color in the printer driver. The
settings specified in [Matching Method] and
[Monitor Profile] will be enabled.
Gamma Adjustment:
Performs gamma adjustment with the
gamma correction value specified in the
[Gamma] box.
[Matching Method] Specifies the matching method by assigning
highest priority when the [Driver Matching
Mode] is selected in the [Matching Mode]
box.
Perceptual [Monitor Color Matched]:
Gives priority to matching the hue of the
color on the monitor with the color of the
printed output.
Colorimetric:
Gives priority to reducing the color difference
between the original document on the
screen (a logo, for example) and the printed
output.
Saturation:
Gives priority to vividness in matching.
NOTE
This option can be selected only when [Driver Matching Mode] is
selected for [Matching Mode].
[Monitor Profile] Specifies the setting suitable for your monitor
when the [Driver Matching Mode] is selected
in the [Matching Mode] box.
Back Previous
NOTE
In the case where several gamma values are provided for one
option, select the higher gamma value to obtain better results if
the printed image is lighter than that of the monitor.
If the monitor is set to a custom setting, it is difficult to produce
printed output similar to the color of the monitor when performing
matching.
[Gamma] Specifies the gamma correction value when
the [Gamma Adjustment] is selected in the
[Matching Mode] box.
The brightness of the document printout can
be adjusted without losing the brightest and
darkest portion of the document.
This option is useful when the printout result
is brighter than the original image (for
example, a photograph before scanning or
graphics displayed on the monitor), or when
you want to intentionally change the
brightness of the output.
Four gamma correction values are provided.
The larger the value, the darker the printout
is.
1.0
1.4
1.8
2.2
[Restore Defaults] Resets all the current settings to their default
values.
TOP
Next
2-40