Canon FAXPHONE L120 Software Manual page 70

Introduction
1
Printer stops printing.
Printing
2
Troubleshooting
3
Appendix
4
Printout is wrong.
Table of Contents
Index
Q Is the interface cable loose?
A Check your computer and cable.
Q Are you working on an application in the
foreground?
A Printer performance improves if you give priority to
your print job.
Q Is there a communication problem between the
printer and your computer?
A Make sure your cable connections are secure.
A Make sure your USB cable is less than 9.8 ft (3 m)
long.
A Make sure you are not using a USB hub.
A Make sure you have selected the correct printer
driver in Windows.
Q Is a wrong printer driver selected in the
[Printers and Faxes] (Windows 98/Me/2000:
[Printers]) folder?
A Make sure the corresponding printer driver is
selected in the [Printers and Faxes] (Windows 98/
Me/2000: [Printers]) folder.
Back
Printer locks up system.
Q Does your system setup have a problem?
A Make sure that you have a high-quality shielded
interface cable.
A The problem might be in your BIOS. Verify that
your BIOS setup is correct. (See your computer's
documentation for details.)
A Verify that your physical memory is working
correctly.
A If you have a Toshiba laptop, change the following
line in your CONFIG.SYS. file:
c:\winutils\mxtime.exe
to:
REM c:\winutils\mxtime.exe
TOP
Previous Next
3-3