Magnavox ZV450MW8 - DVD Recorder And VCR Combo Owner's Manual page 84

Playback (cont'd)
Still Mode (Default : Auto)
Select "Auto" usually.
Use [K / L] to select a setting, then press [OK].
Video - Still Mode
Auto
Field
Frame
Your setting will be activated.
Auto : Optimum resolution setting ("Field" or
"Frame") will be selected.
Field : Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.
Note
• Frame is 1 completed video image made up of 2
fields (There are 30 frames per second of NTSC video).
3
Language
Use [K / L] to select a desired item, then press [OK].
Language
Disc Menu
Audio
Subtitle
Disc Menu (Default : English)
Set the language for disc menu.
Use [K / L] to select a setting, then press [OK].
Language - Disc Menu
English
French
Spanish
Other
Your setting will be activated.
Audio (Default : Original)
Set the audio language.
Use [K / L] to select a setting, then press [OK].
Language - Audio
Original
English
French
Spanish
Other
Your setting will be activated.
• When "Original" is selected, the audio language will be
in the disc's default language.
84 84 EN EN
SETUPS
DVD
DVD
English
Original
OFF
DVD
DVD
Subtitle (Default : OFF)
Set the subtitle language.
Use [K / L] to select a setting, then press [OK].
Language - Subtitle
OFF
English
French
Spanish
Other
Your setting will be activated.
If "Other" is selected, press 4-digit code using
[the Number buttons].
Language - Subtitle
-
• When you finish entering the code, press [OK]. Refer
to the language code table on page 95.
Note
• Only the languages supported by the disc can be
selected.
• Audio language setting may not be available to
some discs.
• You can change or switch off the subtitles on a DVD
also from the disc menu if it is available.
• Press [CLEAR] or [s] to erase numbers entered
incorrectly.
DVD
DVD
Code Input
- - -