Rf Modulator Connection - Magnavox ZV450MW8 - DVD Recorder And VCR Combo Owner's Manual

RF MODULATOR CONNECTION

If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a stereo audio/video RF
modulator. In this case, follow the instructions below.
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator's channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area.
If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF
modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as you set the RF modulator's channel 3/4 switch to.
For more details, follow the manual supplied with the RF modulator.
rear of your TV
ANT. IN
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• The quality of picture may become poor if this unit is connected to an RF modulator.
14 14 EN EN
rear of this unit
DVD/VCR
DVD
DIGITAL AUDIO S-VIDEO COMPONENT S-VIDEO
VIDEO OUT
S-VIDEO IN --- AUDIO --- OUT AUDIO OUT OUT
Y
P B
L
OUT
/C B
COAXIAL
L
P R
R
/C R
R
IN
IN --- VIDEO --- OUT
RCA audio RCA video
cable cable
R L 3
TO TV AUDIO IN VIDEO IN CHANNEL
rear of your
RF modulator
OUT
DVD/VCR
IN --- AUDIO --- OUT
L L
IN
ANTENNA
R R
IN
IN --- VIDEO --- OUT
OUT
IN
ANTENNA
RF coaxial cable
4
ANT. IN
Set channel 3 or 4
VHF / UHF
antenna
RF coaxial cable
or
cable TV
company