Energy Star Compliance - HP IQ846 - TouchSmart - 4 GB RAM Manual

Digital Television Transition Notice
(United States Only)
The nationwide switch to digital television broadcasting will be
complete on June 12, 2009, but your local television stations
may switch sooner. After the switch, analog-only television sets
that receive TV programming through an antenna will need a
converter box to continue to receive over-the-air TV. Watch your
local stations to find out when they will turn off their analog
signal and switch to digital-only broadcasting. Analog-only TVs
should continue to work as before to receive low power, Class
A or translator television stations and with cable and satellite
TV services, gaming consoles, VCRs, DVD players, and similar
products.
Information about the DTV transition is available from your
local television stations, www.DTV.gov, or 1-888-CALL-FCC
(TTY 1-888-TELL-FCC), and from www.dtv2009.gov or
1-888-DTV-2009 (TTY 1-877-530-2634) for information about
subsidized coupons for digital-to-analog converter boxes.

ENERGY STAR compliance

HP computers marked with the ENERGY STAR
compliant with the applicable U.S. Environmental Protection
Agency (EPA) ENERGY STAR specifications for computers. The
EPA ENERGY STAR logo does not imply endorsement by the
EPA. As an ENERGY STAR Partner,
Hewlett-Packard Company has
determined that the products marked
with the ENERGY STAR logo are
ENERGY STAR qualified as per the
applicable ENERGY STAR guidelines
for energy efficiency. The following
logo will appear on all ENERGY STAR
qualified computers:
The ENERGY STAR program for computers was created by the
EPA to promote energy efficiency and reduce air pollution
through more energy-efficient equipment in homes, offices, and
factories. One way that products achieve this goal is by using
® ®
the Microsoft Windows power management feature to reduce
power consumption when the product is not in use.
The power management feature allows the computer to initiate
a low-power or "Sleep" mode after a period of user inactivity.
When used with an external ENERGY STAR qualified monitor,
this feature also supports similar power management features of
the monitor. To take advantage of these potential energy
savings, the power management feature has been preset to
behave in the following ways when the system is operating on
AC power:
•
Turn off the display after 15 minutes
•
Initiate Sleep after 30 minutes
The computer exits Sleep when the power/Sleep button is
pressed. When the Wake On LAN (WOL) feature is enabled,
the computer can also exit Sleep in response to a network
signal.
Additional information on the potential energy and financial
savings of the power management feature can be found on the
EPA ENERGY STAR Power Management Web site at
http://www.energystar.gov/powermanagement
Additional information on the ENERGY STAR program and its
environmental benefits are available on the EPA ENERGY STAR
Web site at http://www.energystar.gov
Canada Department of Communications
(DOC) Notice
Telephone Connection
The Canada Department of Communications label identifies
certified equipment. This certification means that the equipment
meets certain telecommunications network protective,
operational, and safety requirements. The department does
not guarantee the equipment will operate to the user's
satisfaction.
Before installing this equipment, the user should ensure it is
permissible to connect it to the facilities of the local
communications company. The equipment must be installed
®
logo are
using an acceptable method of connection. In some cases, the
company's inside wiring associated with a single line individual
service may be extended by means of a certified connector
assembly (telephone extension cord). The customer should be
aware that compliance with the above conditions may not
prevent degradation of service in some situations.
Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated by the
supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the
telecommunications company cause to request that the user
disconnect the equipment.
Users should ensure, for their own protection, that the electrical
ground connections of the power utility, telephone lines, and
internal metallic water pipe systems, if present, are connected
together. This precaution may be particularly important in rural
areas.
WARNING: Users should not attempt to make
such connections themselves, but should contact
the appropriate electrical inspection authority or
electrician, as appropriate.
WARNING: The Load Number .9 assigned to each
terminal device denotes the percentage of the
total load to be connected to a telephone loop;
this is used by the device to prevent overloading.
The termination on a loop may consist of any
combination of devices, subject only to the
requirement that the sum of the Load Numbers
does not exceed 100.
21