Replacing The Power Supply Assembly - Lenovo 7269D7U - Topseller M58e Sff E7500 2.93G 3Gb 320Gb Dvdrw W7p/Xpp Hardware Maintenance Manual

3. To reinstall the bezel, align the plastic tabs on the right side of the bezel with the corresponding holes in
the chassis, then pivot the bezel inward until it snaps into position on the left side.
4. To complete the installation, go to "Completing the FRU replacement" on page 95.

Replacing the power supply assembly

Attention
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
There are no servicable parts inside these components.
Attention
Do not open your computer or attempt any repair before reading and understanding the "Important safety
information" in the ThinkCentre Safety and Warranty Guide that was included with your computer. To obtain
a copy of the ThinkCentre Safety and Warranty Guide, go to:
http://www.lenovo.com/support
This section provides instructions on how to replace the power supply assembly.
To replace the power supply assembly:
1. Remove the computer cover. See "Removing the computer cover" on page 69.
.
Chapter 8 Replacing FRUs (Types 7258, 7260, 7268, 7270, 7280, 7296, 7298, 7304, 7307,7413, 7491, and 7508)
71